Omega Vehicle Security Wireless Sensor System zSeries Manuale Utente Pagina 51
- Pagina / 72
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
4.8.3 Device Setting and Configuration
Make sure that the Coordinator is configured (using web access) to the settings below.
TCP Connection = any value from 1 to 5
Port number = 2000 (other values may be acceptable as long as Mail Notifier is setup
with the same Port number).
Then on the Mail Notifier Alarm Editor:
1) Set the “IP address” (for example 192.168.1.200).
2) Specify “Socket Number” 2000.
3) Set the “Address/RS485 Unit” to the Device ID number for an End Device.
4) Set the “Reading Cmd” using general commands in the Table below.
5) Define the Alarm Configuration (High/Low, High value, or Low value).
Specify Email Interval. This determines how many seconds each subsequential
alarm notification will be sent.
Determine Monitor interval. This establishes the interval or time resolution in
seconds for which readings will be obtained from the device.
Desired Value to Monitor Reading Cmd string Actual Command String
(see Note 2)
Reading A zRdgA ERDB003
Reading B zRdgB ERDB003
Reading C zRdgC ERDB003
Reading D zRdgD ERDB003
Battery voltage (mV) zBatt EQPE003
Signal Level zSignal EQPE003
Sleep Interval zSleep EQPE003
Status (see Note 4) zAddress EQNF003
1. The End Devices are configured in Mail Notifier with symbolic commands
rather than actual device commands.
2. zRdgA with RS485 Device Unit # as 3, for example, is sent as ERDB003.
3. “Reading A” will be the first value returned for a device in response to a
command such as ERDB003.
4. “Status” can be used to detect an address conflict. The value should be
tested to be at value 32 if there is an address conflict.
45
- User’s Guide 1
- TABLE OF CONTENTS 3
- LIST OF FIGURES: 5
- SERIAL # 11
- Optional 12
- External 12
- • To turn on Power Switch 13
- • To access JTAG connector 13
- OFF ON 16
- Coordinator 18
- Section 4.3 for details 25
- ACCESS CONTROL 26
- ADMINISTRATOR 27
- READINGS: BY GROUP 29
- None High 31
- Java Runtime Settings 35
- Control Panel 35
- Java Control Panel 35
- Wireless Sensors ID: 0 - 7 36
- Wireless Sensors ID: 8 - 15 36
- Wireless Sensors ID: 24 - 31 36
- Diagnostic 38
- CONFIGURATION 39
- SENSOR SETUP: BY GROUP 40
- SENSOR SETUP 41
- SENSOR PARAMETERS 42
- C:\WINDOWS\system32\cmd.exe 45
- 4.6 ARP Protocol (continued) 47
- Alerts List 49
- Mail Server 50
- Device Info (1 of 2) 52
- Alarm Configuration 52
- Only Monitor Access 52
- End Device 54
- FRESNEL ZONE 55
- END DEVICE 55
- COORDINATOR 55
- 2120191817161514131211 57
- PART 6 SPECIFICATIONS 58
- switch #1 must be turned ON 69
- WARRANTY/DISCLAIMER 71
- RETURN REQUESTS/INQUIRIES 71
- OMEGA…Of Course! 72
Prodotti e manuali riguardandi no Omega Vehicle Security Wireless Sensor System zSeries
no Omega Vehicle Security TJ-USB Manuale Utente
(20 pagine)
(20 pagine)
Samsung FH070EAMT manuály
Uživatelské manuály a uživatelské příručky pro DVD přehrávače Samsung FH070EAMT.
Poskytujeme manuály pdf Samsung FH070EAMT ke stažení zdarma podle typů dokumentů:
Commenti su questo manuale